Cleaning Under Running Water - Silvercrest SRR 3.7 B2 Operating Instructions Manual

Cleaning under running water

1) Press the release button
2) Overstretch the cutting unit
and off.
3) Hold the cutting unit
flows through the shaving heads from the inside to the outside.
CAUTION! MATERIAL DAMAGE!
Hold only the cutting unit
handset can be damaged irreparably if it is held under running
water.
4) Allow the cutting unit
5) Replace the cutting unit
into place and is seated firmly:
SRR 3.7 B2
so that the cutting unit
a little so it can be pulled upwards
under the running water so that the water
under running water! The shaver
to dry.
on the shaver. Ensure that it snaps
pops open.
GB │ IE │ NI │
13 ■