Advertisement
Clock Programming
Press twice the "MENU" button until you see the words "MAIN MENU CLOCK" on the screen
and press "OK".This menu allows the user to review and adjust the controller's real time clock
parameters. Display format of time, day of week, month, day and year are based upon the controller
setup. The flashing value indicates parameters, which can be modified.
The "CLOCK" programming sequence is as follows:
The thermostat will display the present year with the two last digits flashing on the second line.
Month and day are displayed on the first line. Clock parameters cannot be adjusted yet.
Next press the "Up/Down" arrows to adjust the year. Press "OK" to activate selected value and pro-
ceed to the next display item.
The month/date value is displayed in month/date format based upon the controller setup information.
The selected format will display the month/date accordingly. "UP" and "Down" arrows are used to
modify the month value.
Next press the "OK" button to activate selected value and proceed to the next display item.
Display month date only with date flashing. The month/date value is displayed in month/date format..
"UP" and "Down" arrows are used to modify the date value.
Display day of week characters (Mon,Tue,Wed,Thu,Fri,Sat,Sun) with the current day of week
sets automatically according to the date chosen.
The time value is displayed in 12 or 24 hour format based upon the controller setup information.
Display time only with hours flashing. "UP" and "Down" arrows are used to modify the hour value.
Next press the "OK" button to activate selected value and proceed to the next display item. Display
minutes only flashing."UP" and "Down" arrows are used to modify the minutes value
Next press the "OK" button to activate selected value.
The display shows "GO BACK", press "OK" or hold on for 30 seconds and this completes the
clock review/adjustment, returning the display to the default monitor screen.
- 11 -
Tstat Series
Advertisement
