Operational Fonctions; Adjustable Set-Points - Bravo Controls TSTAT7 User Manual

Adjustable set-points

The buttons both the up arrow and down arrow allow the consumer to increase or decrease the
desired set-point they wish to have. To adjust the set-point on the room sensor can only be done
when the occupied symbol is being displayed on the LED panel. To increase the set-point tempera-
ture by a degree simply hit the up arrow button. To decrease the set-point temperature by a degree
simply hit the down arrow button and continue either step until desired set-point is achieved. After the
set-point is increased or decreased the LED panel will display the current set-point, until the tempera-
ture in the room reaches the desired set-point (warmer/cooler) of the occupant.

Operational Fonctions

There are six buttons that operate the TSTAT7
Buttons
Top button
(right side)
Second button from top
(right side)
MODE: Middle button
(right side)
MENU: Second button from bottom
(right side)
OK: First button from bottom
(right side)
OVERRIDE switch unmarked
(center of front cover)
Functions
Increases set-point
Decreases set-point
Modifies Cool/Heat/Auto/Off to satisfy room
temperature
Quick access to the main menu for
settings
Press Ok to enter the settings of the main
menu
For new occupancy adjustments
- 10 -
Tstat Series
general