Table of Contents
Advertisement
5.1.1.2 Ethernet
The MTX-GTW directly drives the Ethernet 1 interface. The SMSC LAN8720Ai is used as PHY.
Type of media:
Signal characteristic:
Status LEDs:
Modes:
Interface on module:
Manufacturer
Molex: 85502-5008
5.1.1.3 RS232/485/422
The AUART0 of the TQMa28 drives the RS232/485/422 interface on the MTX-GTW. The Maxim
MAX3160 is used as a transceiver.
In addition, two signals are used in order to configure the Maxim transceiver in one of its operational
modes:
Signal
SW1_3
SW1_4
Transfer rate:
Interface on module:
Handshake:
ESD protection:
www.mtxm2m.com
10/100 Mbit
Compatible with the IEEE-802.3 standard
2
MDI, Auto-MDIX
RMII/ENET0
Up to 10Mbit/s (full-duplex)
AUART0
RTS# used for clearing the transmission direction
±15kV human body model
www.matrix.es
MTX Terminals® by MATRIX ELECTRONICA S.L.U
Description
Right angle RJ45 jack
Description
RS485/RS232#
Half_Duplex/Full_Duplex#
2015/08 v1.6
MTX-GTW
/
Page 13
44
Advertisement
Table of Contents
