Accessories are kept inside the unit. ELECTRIC SHOCK, SHORT-CIRCUIT, LEAKS, FIRE OR OTHER DAMAGE TO THE EQUIPMENT. BE SURE ONLY TO USE ACCESSORIES MADE BY DAIKIN, WHICH ARE SPECIFICALLY DESIGNED FOR USE WITH THE Washer for EQUIPMENT AND HAVE THEM INSTALLED BY A hanging bracket PROFESSIONAL.
For installation, choose one of the possibilities listed below. Only use accessories, optional equipment and spare parts made or approved by Daikin. For the following items, take special care during construction and check after installation is finished Tick ...
Suspension bolt installation To determine proper bolt position use the carton delivered with the unit. Cut the carton according to the printed instructions. Protection net Remove the carton from under both trolleys. (Refer to figure 3 - item 1.) Install the option kit temporarily. Move the option kit to the indoor unit from the bottom side in Place the cut part of the carton next to the already installed duct unit.
Backlight for LCD NOTE In case of combination of Auto-Cleaning option kit with Press any button and the backlight will be lit for approximately 30 indoor unit FXDQ-A2/P2 contact your Daikin dealer to seconds. obtain BAE20WH wire...
Cleaning of the interior Test items on test operation Tick Remove protection net. when checked Test items Clean interior of the casing by vacuum cleaner or wet cloth. Are both trolleys moving? Perform a test operation. Is there no abnormal sound? Use vacuum cleaner to remove remaining dirt from the dust box.
IRING DIAGRAM Unified Wiring Diagram Legend For applied parts and numbering refer to the wiring diagram sticker supplied on the unit. Part numbering is realized by Arabic numbers in ascending order for each part and is represented in the overview below by symbol “*” in the part code. CIRCUIT BREAKER CIRCUIT BREAKER PROTECTIVE EARTH...
Indicator FOR THE USER AMES AND FUNCTIONS Filter Cylinder unit Operation mode selector button - Press this button to select the operation mode of your preference. Brush unit with a dust box (Available modes vary with the connecting model.) Hose Fan speed button Decoration panel - Used to indicate the Air Volume setting screen.
Liquid crystal display Method of specifying start time There are two display types, i.e., standard and detailed displays. Operation method The standard display is by default set. To go to the detailed display, select the detailed display in the ...
&C NOTE LOCK ALENDAR The filter auto clean function takes around 5-10 minutes. Depending on casing size. In case of a high dust environment the cleaning cycle takes 10~20 minutes. Setting the clock Execution of the cleaning function, always during the scheduled time slot of 3 hours, will start as soon as possible considering the following Operation method conditions:...
Press button to select on the settings NOTE Contact your Daikin installer to change the factory confirmation screen. set appearance interval of dust collection sign. Press Menu/Enter button to set the clock and return to the basic screen.
(e.g., a stand-type or handheld-type vacuum cleaner) or a pipe that has a hole midway to Connect the provided connection pipe and attachment to match cause air leakage. Consult your Daikin dealer if the vacuum cleaner pipe. the attachment cannot be connected to your Insert the connection pipe and attachment into the vacuum vacuum cleaner.
If the product is still not in good condition after checking the above, contact your on the lower part of the basic screen. Daikin dealer. The customer must not attempt to repair the product. At the time of this state, press the Menu/Enter button on the basic screen.
For details, contact your Daikin dealer. Furthermore, the overhauling * The operation indicator will blink. or internal cleaning of the product conducted by repairers other than those authorized by Daikin may not be within the scope of Daikin’s "Warning: Push Menu Button." product warranty term.