IV. PARTS LIST SECTION
A. Ordering Information
1. List model number of machine.
2. List part number and description of part (not item number).
3. Wherever alternate parts are shown due to product improvement, inspect the part
you have and provide additional description as necessary.
4. Specify mode of shipping desired, such as, parcel post, truck, air freight, U.P.S.,
best way, etc.
B. Optional Accessories
1. Vacuum Hold Down: Part Number 407000 Provides a means of securing the core
drill on smooth evenly textured surfaces without using anchors.
2. Water Collector Kit: Part Number 402034 recovers the excess water used during
the drilling operation and pumps it into a drum. The ring is used to limit the amount
of area that is exposed to water. The ring is best used in areas where the surface
texture is smooth and even.
3. Shaft Couplings: The couplings are used as adapters which decrease or increase
the spindle diameter and thread dimension.
Part Number
400145
400146
400147
400148
4. Shaft Extensions: Extend the depth to which a core bit will drill when the carriage
has reached the maximum travel distance of the column.
Part Number
402754
402755
402756
402757
402758
402759
5. Motor Spacer Plate Kit: Part Number: 408002 Moves the motor away from the
column so that the drill will accept up to a fourteen inch bit.
Spindle Thread
1/2"--20
5/8"--11
5/8"--11
1-1/4"--7
Spindle Thread
1-1/4"--7
1-1/4"--7
1-1/4"--7
5/8"--11
5/8"--11
5/8"--11
NortonParts.com
888-634-4289
An iBuy Stores Company
Adapter Thread
5/8"--11
1/2"--20
1-1/4"--7
5/8"--11
Length
9"
3.5"
12"
12"
6"
3"
14