Installation And Setup; Overview; Setting I/O Switches For Analog Audio (1-8) Ports - Cobalt Digital Inc 9433-EMDE-ADDA-EOOE Product Manual

Overview

Setting I/O Switches for Analog Audio (1-8) Ports

IN
AN-AUD I/O 1
AN-AUD I/O 2
AN-AUD I/O 3
AN-AUD I/O 4
AN-AUD I/O 5
AN-AUD I/O 6
AN-AUD I/O 7
AN-AUD I/O 8
9433-EMDE-ADDA-OM (V1.4)

Installation and Setup

Chapter 2
This chapter contains the following information:
Setting I/O Switches for Analog Audio (1-8) Ports (p. 2-1)
•
Installing the 9433-EMDE-ADDA Into a Frame Slot (p. 2-2)
•
Installing a Rear I/O Module (p. 2-3)
•
Fiber and Balanced Audio Connections (p. 2-7)
•
Setting Up 9433-EMDE-ADDA Network Remote Control (p. 2-8)
•
Each analog channel (
input or output using the card DIP switches as shown in Figure 2-1.
Note: All switches are set as IN (inputs) as factory default.
OUT
Figure 2-1 AN-AUD I/O (1-8) Direction Switches
9433-EMDE-ADDA PRODUCT MANUAL
thru
AN-AUD I/O 1 AN-AUD I/O 8)
Chapter 2
is configurable as an
Top Rear of Card
2-1