Techpro IP-EL Series User Manual page 2

Welcome
Thank you for purchasing our IP camera!
This user's manual is designed to be a reference tool for your system.
Please read the following safeguard and warnings carefully before you use this series product! Please keep
this user's manual well for future reference!
Important!
To find your cameras on the network, use the "config Tool" found in the
CD(under Software>ConfigTool) that came with your package. Some
cameras will be assigned as a DHCP. Therehore, The "IP Config Tool is
required to find the camera on the network.
DO NOT Connect all the cameras on the same network at the same time.
This will cause IP conflict within your network and you will not be able to
accress your cameras. Before connecting all the of the IP cameras on the
network One-At-A-Time.
DO NOT power the camera with both PoE and a power supply at the
same time.
If you purchase a PoE(Power Over Ethernet) device from us, Whether
as an External POE Switch or built into on of our NVRs, your camera
will be powered through the Ethernet cable and will not need to power it
with a seperate power supply.
*Restrictions may apply
Our units do not support PAL
*