Techpro IP-EL Series User Manual page 11

Step 3
Open the accessories bag and then take the expansion bolt out. Insert the expansion bolt into
the installation holes.
Step 4
Take the screws from the accessories bag and then use them to secure the device on the
installation surface of the wall or the ceiling. The sun shield of the device can move forward or
backward. Please secure the set screw of the sun shield after you fixed the device. Step 5
Connect the corresponding cables.
Step 6
Use the cross-head screwdriver to loosen the adjust screw.
Step 7
Turn the device in different directions to make it suitable for the monitor position.
Step 8
Use the cross-head screwdriver to fix the adjust screw firmly.