Character Entry - Docomo SH-03H Instruction Manual

2
When you erect the AC adapter power plug and
insert it into an outlet or insert the DC adapter
power plug into a car cigarette lighter socket,
the charging lamp illuminates and charging
starts
Power plug 100V AC
outlet
AC adapter
3
When charging is complete, the charging lamp
turns off
4
Remove the AC adapter power plug from the
outlet, or remove the DC adapter power plug
from the car cigarette lighter socket
5
Remove the microUSB plug of the AC adapter/
DC adapter horizontally from the external
connector terminal of the handset
When using a DC adapter
The DC adapter should only be used in negative grounded
vehicles (12 and 24V DC).
Do not use with the car engine shut off. May drain the car
battery.
The DC adapter fuse is a consumable product. For
replacement, purchase a new fuse at a nearest auto parts
retailer etc.
Refer to the user's guide of DC Adapter 04 for details.
Charging with Micro USB Cable 01
You can charge the handset by connecting the handset to a PC
with Micro USB Cable 01 (sold separately).
For details on connecting to a PC nP.57 "Connecting the
handset and PC"
Power plug
Cigarette lighter
socket
DC adapter
Turning power on/off
■
Turning power on
H (for at least 2 seconds)
1
When you turn the power on for the first time, make the initial
settings (nP.23 "Initial settings").
■
Turning power off
H (for at least 1 second)/[Power off]
1
■
Turning power off forcibly
You can forcibly turn the power off if the screen does not respond or
the power cannot be turned off.
H (for at least 8 seconds)
1
Release your finger after the vibrator is activated to turn the
power off.
■
Showing/Hiding the main display
The main display is turned off when the handset is not in use for a
set length of time.
Press any of key to turn on the display while the main display is
turned off.

Character entry

Enter characters for functions or apps such as phonebook and
mail on the handset.
Mechanism of character entry
Multiple characters are assigned to each dial key. Character
switches by pressing a key.
There are two types character input modes as follows.
■ Full-width characters: Kanji, Hiragana, Katakana, upper case
alphabet, lower case alphabet, number, symbol
■ Half-width characters: Katakana, upper case alphabet, lower
case alphabet, number, symbol
1
2
3
1 Cursor
Point the cursor to a position to add.
2 Submenu
Use to make entry settings or register words to the user
dictionary (nP.20 "Submenu operations for character entry").
3 Switch input mode
Switch the input mode.
Press m to switch input mode in the order of Half alphabet
･
→Half numeric→Hiragana.
4 Input mode
You can check the input mode by the status icon.
5 Pict/Sym
Displays pictograms/Deco-mail picture/symbol/emoticons list.
･
They may not be entered depending on app.
19
4
5
Before Using the Handset