Docomo SH-03H Instruction Manual page 11

■
Profile
Display your own phone number registered to the docomo nano UIM
card. You can register a name, mail address, etc.
By default, only phone number which is registered to the installed
docomo nano UIM card is displayed.
In the standby screen, z/[Profile]
1
2
Check/use the profile
1
2
3
1 Name/Reading
Displayed when a name is registered.
2 Own phone number
3 Image
Editing/Using profile
In the standby screen, z/[Profile]
1
z/[Edit profile]/set each item/C
2
For items that can be set nP.28 "Adding contacts to
phonebook"
To send the profile: z/[Send via infrared]/[Send data
(share)]/follow the instructions on the screen and operate
To copy an item: Point the cursor to an item to copy/m
Checking mail address
In the standby screen, m
1
2
[Mail settings]/[My address]
Select [Update] to update My address information.
■
Using TOUCH CRUISER EX
When operating the camera, browser, etc., touch the handset touch
area with your finger to operate like using a touch pad. Activating a
function/app corresponding to TOUCH CRUISER EX enables
TOUCH CRUISER EX. You can operate with [
When the TOUCH CRUISER EX operation guide screen appears,
read the content and then follow the instructions on the screen.
Each pressing s for at least 1 second switches TOUCH
CRUISER EX enabled/disabled.
When TOUCH CRUISER EX is disabled, activating a function/app
corresponding TOUCH CRUISER EX (Browser, Databox) does not
enable TOUCH CRUISER EX.
Even when TOUCH CRUISER EX is enabled, key operations are
available (except for some apps).
] (pointer).
Touch
area
17
Charging
The battery pack is not fully charged at the time of purchase. Be
sure to charge the battery before use.
■
Cautions while charging
For details on the estimated charge time nP.76 "Main
specifications"
The battery can also be charged with the handset turned on
(While charging, the battery icon appears with [
superimposed).
Do not charger for a long time with the power left turned on. If the
handset is left turned on after charging is complete, the battery
pack charge level decreases.
In this case, an AC or DC adapter (sold separately) charges the
battery again. However, depending on the time when the handset
is disconnected from the AC or DC adapter, the battery charge
level may be lower or the battery pack may only be usable for a
short time.
If the handset is left for a long time even after the charging is
completed, the battery level may decrease.
When the battery is empty and the handset is being charged, the
charging lamp may not illuminate immediately. However,
charging is in progress.
If the battery empty alert is displayed and the power cannot be
turned on, charge the battery for a while.
While charging, the handset may not be turned on even when the
charging lamp is illuminated in red. Charge longer and try turning
the power on again.
Frequently recharging the battery when its power is still remaining
enough may shorten the usable life of the battery pack. It is
recommended to use the battery to a certain level (e.g. after the
battery level decreases) before recharging.
When the battery becomes warm, charging may automatically
stop even if the battery has not been fully charged. Charging
automatically resumes after the temperature lowers to an
appropriate temperature.
■
Estimated battery life when fully charged
Continuous talk time FOMA/3G
Continuous stand-by FOMA/3G
time
For battery life nP.76 "Main specifications"
■
Battery pack usable life
Battery pack is a consumable product. Battery life power charge
is gradually reduced every time the battery is charged.
When battery life per charge is reduced to approximately half of
the default time, this means that the battery pack is approaching
the end of its usable life. In this case, it is recommended to replace
the batter pack as soon as possible. Depending on usage, the
battery pack may swell as it approaches the end of its service life
but this will not cause problems.
]
Approx. 400 min.
At rest: Approx. 610 hours
Before Using the Handset