Example To Reconnect 802.1X Authenticated Connectiom After 802.1X Authenticated Connection Is Failed In Profile - CNET CWP-906 User Manual

4.3.3 Example to Reconnect 802.1x Authenticated Connection after 802.1x Authenticated con-
nection is failed in Profile
There are two situations where a user is able to reconnect an 802.1x authenticated connection and au-
thenticate successfully after an 802.1x authenticated connection has failed on the profile page. They
are as follows:
When keying in an identity, password or domain name error:
1. Authentication type chooses "PEAP", key identity into test. Tunnel Protocol is "EAP-MSCHAP-v2, the tunnel identity
and tunnel password are tested. Those settings are the same as our intended AP's setting.
2. Because of keying identity and password errors, the result will appear as in the image below.
CNet Technology Inc.
www.CNet.com.tw