Table of Contents
Advertisement
4.3 Security
4.3.1 Auth / Encry.Setting-WEP/TKIP/AES
Figure 3-1 Auth.\Encry. Settings
1. Authentication Type: There are 7 authentication modes supported by RaUI. They are open, Shared, LEAP, WPA and
WPA-PSK, WPA2 and WPA2-PSK.
2. Encryption Type: For open and shared authentication mode, the available encryption types are None and WEP. For
WPA, WPA2, WPA-PSK and WPA2-PSK authentication mode, the encryption type supports both TKIP and AES.
3. 8021X: This is introduced in the topic of Section 3-2.
4. WPA Pre-shared Key: This is the shared key between the AP and STA. If operating in WPA-PSK and WPA2-PSK au-
thentication mode, this field must be filled with a key between 8 and 32 characters in length.
5. WEP Key: Only valid when using WEP encryption algorithm. The key must match the AP's key. There are several
formats to enter the keys.
a. Hexadecimal - 40bits: 10 Hex characters.
b. Hexadecimal - 128bits: 32Hex characters.
c. ASCII - 40bits: 5 ASCII characters.
d. ASCII - 128bits: 13 ASCII characters
CNet Technology Inc.
www.CNet.com.tw
Advertisement
Table of Contents
