Siemens SIMATIC S7-1500 Manual page 23

Technical specifications
Switching capacity of outputs
With lamp load, max.
Low energy/fluorescent lamps with electronic
control gear
Fluorescent tubes, conventionally compensated
Fluorescent tubes, uncompensated
Output current
for signal "1" rated value
for signal "1" permissible range, min.
for signal "1" permissible range, max.
for signal "0" residual current, max.
Parallel switching of 2 outputs
For logic operations
For increased performance
For redundant control of a load
Switching frequency
With resistive load, max.
With inductive load, max.
With lamp load, max.
Total current of outputs
Max. current per channel
Max. current per group
Max. current per module
Relay outputs
Number of relay outputs
Rated input voltage of relay coil L+ (DC)
Current consumption of relays (coil current of all
relays), max.
External fuse for relay outputs
Contact connection (internal)
Size of motor starter according to NEMA, max.
Number of switching cycles, max.
Relay approved acc. to UL 508
Switching capacity of the contacts
•
•
22
With inductive load, max.
With resistive load, max.
1500 W; (10,000 switching cycles)
10 x 58 W (25,000 switching cycles)
1 x 58 W (25,000 switching cycles)
10 x 58 W (25,000 switching cycles)
5 A
5 mA; (10 V)
8 A; (thermal continuous current)
0 A
Yes
No
Yes
2 Hz
0.5 Hz
2 Hz
8 A; (see additional description in the manual)
8 A; (see additional description in the manual)
64 A; (see additional description in the manual)
8
24 V
80 mA
With miniature circuit breaker with characteristic
B for: cos φ 1.0: 600 A
cos Φ 0.5 ... 0.7: 900 A
Diazed fuse 8 A: 1000 A
No
5
4000000; (see additional description in the man-
ual)
Yes;
250 V AC/5 A g.p.;
120 V AC TV-4 Tungsten; A300, R300
(see additional description in the manual)
(see additional description in the manual)
DQ 8x230VAC/5A ST Digital Output Module (6ES7522-5HF00-0AB0)
6ES7522-5HF00-0AB0
Manual, 07/2014, A5E03485590-AC