Sqflex Wind - Grundfos IO 100 Product Manual

Application examples

SQFlex Wind

The SQFlex Wind system is based on wind energy as
the only energy source for pump operation.
The system is suitable for installation in areas where
the wind is almost constant seen over a period of time.
As the turbine noise level increases with the wind
speed, siting of the wind turbine near a residence is not
recommended.
8
9
2
3
4
5
1
The IO 102 breaker box makes it possible to brake the
wind turbine when ...
• there is no need for water supply
• the system requires service.
Benefits
• Easy to install
• A minimum of maintenance required
• Few and simple components.
5
1 SQF pump
2 Cable
3 Cable clips
4 Straining wire
5 Wire clamp
8 Wind turbine
9 IO 102 breaker box
SQFlex
13