Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Rishabh young
Summary of Contents for Rishabh young
- Page 1 User Manual RISHABH Young /iYoung Multimeter...
- Page 3 0.4A 600V...
-
Page 5: Table Of Contents
1. Safety Features and Precautions ....2. Initial Start-up ........... 3. Selecting Measuring Functions & Ranges ..3.1 Measuring Function Selection......3.2 Automatic Measuring Range Selection....3.3 Manual Measuring Range Selection....4. Liquid Crystal Display ........4.1 Digital Display ........... 4.2 Display with Backlit(optional)...... - Page 7 Meaning of the symbols Warning of a danger point (Attention, refer to the user manual) Earth (ground) terminal. Double or reinforced insulation...
-
Page 11: Liquid Crystal Display
Note : For Frequency (Hz), Duty cycle (%) and Capacitance (F) measuring range is always Auto. No manual range selection is possible. 4.2 Display with Backlight (Optional) By pressing keys simultaneously backlight can be switched OFF and by pressing keys simultaneously backlight can be switched ON. -
Page 12: Buzzer
When measuring AC Voltage > 750 V, DC Voltage > 1000 V, AC/DC mA > 400.0 mA, AC/DC A > 10 A, the buzzer will keep sounding as the overload warning. Approximate 1 minute before the meter is auto power off, the buzzer will raise constantly 5 sounds to warning. - Page 13 400mA 600V...
-
Page 15: 9.1 Ac Measurement With (Clip-On) C.t
400mA 600V... -
Page 16: Diode Testing & Continuity Measurement
9.1.1 9.1.2 400mA 600V 10 Diode Testing & Continuity Measurement 10.1 Diode Testing... -
Page 17: Continuity Testing
400mA 600V 10.2 Continuity Testing... -
Page 18: Resistance Measurement
400mA 600V 11 Resistance Measurement 400mA 600V... -
Page 19: Capacitance Measurement
Deleting Zero Adjustment Again press REL key. or Activate the function selector switch. or Switch the Multimeter off. 400mA 600V... -
Page 21: Frequency & Duty Cycle Measurement
13 Frequency & Duty Cycle Measurement 13.1 Frequency Measurement Set the function selector switch to VAC and press yellow function key as shown on page 20. The frequency measurement mode is activated. “Hz” symbol is displayed on the LCD. The digital display is expanded to 9999 digits. -
Page 22: Non Contact Voltage (Ncv) Detection
Connections are made the same way as for Voltage measurement measuring range for duty cycle and maximum allowable voltage can be found in chapter “Specifications”. Press yellow Press yellow Press yellow Press yellow function key function key function key function key 400mA 600V 14 Non Contact Voltage (NCV) detection. -
Page 23: Specifications
15 Specifications Input Impedance Meas. Measuring Function Range iYoung Young Resolution V(AC) / V(DC) 100µV 400.0mV >20M 4.000V 40.00V 10mV 400.0V 100mV 600V 100µV 400.0mV 4.000V 10mV 40.00V 400.0V 100mV 600V Approx. Voltage drop at max. meas. current 10µA 40.00mA 450mV 100µA... - Page 24 Digital display inherent Meas. Measuring Overload capacity deviation at Function Range reference conditions Overload + (...% of rdg + ...digits) Overload value duration 400.0mV 4.000V 1050V(DC) 40.00V Continuous 400.0V 600V 400.0mV 4.000V 1050V(AC) 40.00V Continuous 1.5+9 400.0V 600V 40.00mA 1.5+9 480mA Continuous 400.0mA...
- Page 26 /10K Intrinsic 3.5 + 3 3.5 + 3...
-
Page 29: Fuses
Be absolutely certain that only the specified fuses as above are used. The use of fuse with different specifications may place the operator, the system & measuring instrument in danger. The use of repaired fuses or short-circuting of the fuse holder is prohibited. -
Page 30: Housing
more... - Page 32 RISHABH INSTRUMENTS PVT. LTD. Factory: F-31, MIDC, Satpur, Nashik-422 007 India Phone(0253) 2202202, 2202162 Fax : 91 - 0253 - 2351064, 2202302 E-mail : International: exp.marketing@rishabh.co.in India: marketing@rishabh.co.in www.rishabh.co.in Printed in India, Subject to change without Notice Rev A: 18/12/2016...
Need help?
Do you have a question about the young and is the answer not in the manual?
Questions and answers