Specifications; Power Supply Specifications; Fiber Optical Port Specifications - RuggedCom RuggedMC RMC20 Installation Manual

3 Specifications

3.1 Power Supply Specifications

Power Supply Type
24 VDC
48 VDC
HI (88/300 VDC)
1
HI (120/240 VAC)
1
Notes: 1 – This is the same power supply for both AC and DC.
2 – (T) Denotes time-delay fuse
CAUTION: For continued protection against risk of fire, replace only with same type and rating of
fuse.

3.2 Fiber Optical Port Specifications

Parameter
Mode
Connector
Typical Dist. (km)
Optical Wavelength (nm)
Cable Size
Core/Cladding (um)
Tx Power (dBm)
Rx Sensitivity (dBm)
Rx Saturation (dBm)
Typical Budget (dB)
Notes:
1. Maximum segment length is greatly dependent on factors such as fiber quality, and
number of patches and splices. Please consult RuggedCom sales associates when
determining maximum segment distances.
2. All optical power numbers are listed as dBm averages.
©
2006 RuggedCom Inc. All rights reserved
Minimum Maximum
Input Input
18 VDC 36 VDC
36 VDC 72 VDC
88 VDC 300 VDC
85 VAC 264 VAC
Specifications
Multimode
62.5/125
17
Fuse Maximum Power
Rating
3.15A(T)
2
3.15A(T)
2
3.15A(T)
2
ST
5
820
50/125
-13
-33.5
-11
17.5
Consumption
3 W
Rev100