Table of Contents
Advertisement
2.5 seconds
Half second
Half second
Half second
2.5 seconds
General Features
The remote transmitter functions are predetermined and programmed from the factory. The four button
configuration allows for many functions to be performed through a series of tapping and/or holding
buttons.
Sending Commands
When in range and a command has been sent, the remote will receive a page back and LED
confirmation. For example, to send a remote start command from the 2 Way remote, hold down the
button for 2.5 seconds. The remote will beep once to confirm the command has been sent and that the
remote is in range. Once the vehicle has successfully remote started, the remote will receive a
confirmation indicating the vehicle is running.
Receiving Commands
The remote pager will receive confirmation of sent commands and remote start notifications. For
example, after sending the lock command, the 2 Way remote will chirp and LED's flash, confirming that
the vehicle has been successfully locked/armed. To see if your 2 Way remote is in range, hold the
buttons for 2.5 seconds – if the remote receives an audible and visual confirmation, it is
in range. IMPORTANT: 2 Way LED G15 FMX remotes do not receive page back alerts if an alarm is
triggered only while your vehicle is remote started.
Active Lock/Arm and Unlock/Disarm
Tap button
for a half second to lock/arm. The LED will flash on your remote. If your vehicle is
locked, tap button
to unlock; if your vehicle is unlocked, tap button
IMPORTANT: If the alarm has been triggered (Horn is going off), you must wait up to 5 seconds before
disarming the alarm – the first
system.
IMPORTANT: If your alarm has been triggered (Siren is sounding, parking lights flashing, and/or
horn honking), you must wait until your 2 Way LCD remote has been paged before disarming. The
first unlock button tap will shut off the alarm. The second will unlock/disarm the system.
Passive Lock/Arm
no
Option programming menu 2 - Installers Only.
no
Activates passive arming (vehicle will arm/lock 30 seconds after the vehicle is disarmed)
Activates timer start mode. Timer start mode has multiple programmable settings:
yes
duration settings, temperature settings and self start settings.
Activates the built in Turbo Timer function. Additional installation is required when using
yes
this feature on automatic transmission vehicles.
no
Car Check (updates vehicle status on remote pager) / Secure Auxiliary
button tap will shut off the alarm and the second will unlock/disarm the
7
to lock.
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Compustar FMX RF-2WG15R-FM and is the answer not in the manual?