Table of Contents
Advertisement
XP40-Q1942 Explosion-Protected PT Network Camera
About video settings
About video settings
It is possible to configure the following video features in your Axis product:
•
Video stream. See page 17.
•
Stream profiles. See page 20.
•
ONVIF Media Profiles. See page 20.
•
Camera settings. See page 20.
•
Overlay image. See page 21.
•
Privacy mask. See page 23.
How to set up video streams
To set up the product's video streams, go to Video > Video Stream.
The video stream settings are divided into the following tabs:
•
Image. See page 17.
•
H.264. See page 18.
•
Zipstream. See page 19.
•
MJPEG. See page 20.
About the pixel counter
The pixel counter shows the number of pixels in an area of the image. The pixel counter is useful in situations where there is a
specific size requirement, for example for object identification.
The pixel counter can be used:
•
When setting up a video stream, see How to set up video streams on page 17. Under Preview, click Open and select the
Show pixel counter option to enable the rectangle in the image. Use the mouse to move and resize the rectangle, or enter
the number of pixels in the Width and Height fields and click Apply.
•
When accessing the Live View page in Internet Explorer with AXIS Media Control (AMC) in Windows. Right-click in the
image and select Pixel counter. Use the mouse to move and resize the rectangle.
Image
The default image settings can be configured under Video > Video Stream. Select the Image tab.
The following settings are available:
•
Resolution. Select the default resolution.
•
Compression. The compression level affects the image quality, bandwidth and file size of saved images; the lower the
compression, the higher the image quality with higher bandwidth requirements and larger file sizes.
•
Mirror image. If required, the image can be mirrored.
•
Rotate image. If required, the image can be rotated.
17
Advertisement
Table of Contents
