How To Recharge The Battery - Ratio CC Transmitter User Manual

How to recharge the battery

The Ratio® CC Transmitter has a rechargeable Li-Ion battery without memory effect, the given autonomy data may change
of +/-15% depending on the environment temperature.
ATTENTION: Charge the CC Transmitter completely before using it for the first time.
Recharge the CC Transmitter using a USB wall charger (not inclued) and the "Blue-dot" USB cable of your iDive or iX3M (a
spare USB cable is not included with the CC Transmitter).The USB cable that can be used to recharge the CC Transmitter
have a blue dot on the connector. Do not use "red-dot" USB cable to recharge the CC Trasnmitter, it can damage the
connector of the CC Transmitter. During the recharge the CC Transmitter lights up in blue. The recharge is compleated
when the CC Transmitter turns off.
NO
X
1
2 2
1
We recommend to use an USB wall charger (as the one of your mobile phone/tablet) to recharge the CC Transmitter.
In case of use of a PC/Mac USB charger (not recommended), make sure that the PC/Mac doesn't interrupt the electricity supply when
in stand-by. Recharge the CC Transmitter with a PC/Mac is however not recommended because there is the risk to carry out only a
partial recharge cycle.
may change of +/-15% depending on the
The CC Transmitter has 100 diving hr of autonomy with a single charge (this data
environment temperature) or 2 years of stock (if the CC Transmitter was fully charged before the stock)
Even if the CC Transmitter new generation Li-Ion battery hasn't the memory effect, it is however recommended to recharge it
completely. The average recharge time is 3-5 hours, depending on the battery residual charge level.
10