LG ME770d User Manual page 78

Note
v If you use LG PC Sync via Bluetooth, you can
exchange data only within the phonebook.
v When you receive data from another Bluetooth
device, the phone requests confirmation. After
confirming the transfer, the file will be copied on
to your phone.
v The handset normally operates with WIDCOMM
driver(version 1.4.3.4) or WIDCOMM
driver(version 1.4.2.10). And it does not support
the LG Contents Bank with Bluetooth.
Set Bluetooth
(Menu 9.4.1.1)
You can activate or cancel the Bluetooth function.
Paired devices
(Menu 9.4.1.2)
You can view all devices which your KE770 is already
paired to.
If you have entered Paired devices or Handsfree devices,
you will see the following options in both those menus.
v Add new: Allows you to search for new Bluetooth
devices and add them to your phone's list of paired
devices. When you select Add new your handset will
start to search for Bluetooth devices within range.
Once the device you wish to pair appears on the list
press the right soft key [Quit].
Scroll to the desired device and press the left soft key
[Pair]. You will then be asked to enter a passcode. The
passcode can be any code you wish to use (the same
passcode must be used by both devices) or is pre-
determined by the manufacturer of the device you are
trying to pair with. Please check the User Manual of
the device you are initiating the pair with to see if it
already has a predetermined passcode in place.
79