IBM Proventia Management SiteProtector SP2001 Quick Start Manual

Hide thumbs Also See for Proventia Management SiteProtector SP2001:

Table of Contents

Download this manual

IBM Proventia Management SiteProtector SP2001 Quick Start

Guide

This document guides you through the process of connecting and performing the

initial configuration of your IBM

appliance.

Front panel

Rear panel

1. Keyboard port

2. Mouse port

3. Serial port

4. Management Interface (NIC)

5. Unused port

6. VGA port

7. USB ports

8. Power supplies

Proventia

Management SiteProtector SP2001

Table of Contents

Need help?

Do you have a question about the Proventia Management SiteProtector SP2001 and is the answer not in the manual?

Page 1 IBM Proventia Management SiteProtector SP2001 Quick Start Guide This document guides you through the process of connecting and performing the ® ® initial configuration of your IBM Proventia Management SiteProtector SP2001 appliance. Front panel Rear panel Rear panel 1. Keyboard port 2.
Page 2 2. Connect the network to the management interface using the supplied Ethernet cable. 3. Turn on the appliance. The power button is located on the back of the appliance. 4. When the LCD display reads ″IBM ISS Proventia SP2001,″ proceed to Initial Configuration. SiteProtector SP2001: Quick Start Guide...
Page 3 1. From this local workstation, point a Web browser to the Proventia Management SiteProtector SP2001’s management address: https://<configured address>:3994. 2. Read and accept the End User License Agreement. The system then displays the Proventia Management SiteProtector SP2001 home page with the following three links: IBM Proventia Management SiteProtector SP2001 Quick Start Guide...
Page 4 This edition applies to model SP2001 of the IBM Proventia Management ™ SiteProtector appliance and to all subsequent releases and modifications until otherwise indicated in new editions.