Page 1
Mobile Storage System Thank you for purchasing PS100 from Polaroid. To safely use this device, please read this manual carefully and keep it in a safe place. If you pass the mobile storage system on to another user, make sure that you hand over the instruction manual as well.
Contents Set includes Introduction Safety instructions Transportation Get to know your PS100 Charging 6.1. What it can power 6.2. Digital indicator 6.3. Charging via mains power supply Technical specifications Using the PS100 Troubleshooting Frequently Asked Questions (FAQs) Storage and downtime maintenance...
Page 3
Instruction manual PS100 Mobile Storage System...
Instruction manual | PS100 Mobile Storage System 1. Set includes Item Quantity PS100 Mobile Storage System USB-C cable USB charger Instruction manual Remark: We strongly recommend using standard car power inverter for a better user experience.
Congratulations on purchasing Polaroid PS100 Mobile Storage System, a plug-and-play power supply for out- door use. With 84 watt-hours of stored energy, you can keep appliances, or electronic devices running. The Polaroid PS100 Mobile Storage System is designed to keep you powered up outdoor in your RV during emergencies or power outages.
Instruction manual | PS100 Mobile Storage System 3. Safety instructions Observe these instructions to ensure safe usage. Explanation of symbols This symbol together with Noncompliance may very likely lead DANGER means to serious injury or death. This symbol together with...
Page 7
Instruction manual | PS100 Mobile Storage System Danger Do NOT disassemble, repair or modify the unit or the battery. Doing so may result in electric shock, fire, etc. Do NOT place the unit close to or in a fire or expose it to heat. Keep out of direct sunlight.
Page 8
Instruction manual | PS100 Mobile Storage System Warning Use and store the unit only in a clean and dry environment. Do not use and store in dusty and wet envoirnment. Failure to do so may result in a short circuit, smoke or fire if metal dust or small metallic parts come in contact with the connections.
Page 9
Instruction manual | PS100 Mobile Storage System Caution If rust, peculiar odors, overheating or other abnormal circumstances are observed, stop using the unit immedi- ately and contact the dealer or our customer service center. The unit complies with all legal requirements for transport of dangerous goods.
Instruction manual | PS100 Mobile Storage System 4. Transportation 1. Carry the unit with both hands. ATTENTION ATTENTION Keep the unit away from Take extra care to ensure that the unit is never other objects when moving. allowed to fall to the ground.
Instruction manual | PS100 Mobile Storage System 5. Get to know your PS100 Fans 220V 85W AC Output ON/OFF Button Digital Indicator USB Output Type-C port(input/output) Fans 220V 85W AC Output REMARKS QC3.0 Output 1. Press the button to turn on the digital indicator 2.
6. Charging Before use or storage, plug your PS100 into the wall until it is fully charged. If the display shows less than 20% capacity, plug it into a power source, like an AC outlet or a solar panel as soon as possible.
Instruction manual | PS100 Mobile Storage System 6.3. Charging via mains power supply Use the USB wall charger provided and plug your PS100 into any outlet. When the digital indicators display 100, the PS100 is fully charged. This takes about 7 hours.
• When recharging devices with PS100, you should take note of the digital indicator. • If you plug in devices that have a high power requrement, the charge level of PS100 can drop quickly and you will not be able to extract the entire 84Wh of energy.
2. Check the Battery Display. If it is at 20% or below, recharge your PS100. 3. Verify your device is suitable for use with the PS100. a. All PS100 output ports have their own max. power. Check the PS100’s technical specifications to ensure your device is compatible.
2. How do I know if my PS100 is charged? To check the charge level of your PS100, refer to the digital indicator display. The number you see on the display indicates the percentage of total charge remaining. Press the power button to view this display. PS100 can be used until it is empty but we recommend to recharge when the level is below 20%.
Gasoline, thinner, kerosene, petroleum, etc. have the characteristics of solvents. Do not use. 4. Failure Failure to maintain your PS100 by following these steps can result in battery damage which will void the pro- duct warranty. 12. Service life of lithium ion batteries Charge, supply current and store between -20 and 45°C (-4 - 113 °F).
Instruction manual | PS100 Mobile Storage System 13. Disposal and recycling Lithium ion battery As soon as the end of the battery‘s service life is reached, the entire lithium ion battery can be recycled. Do not open or disassemble the unit.
Instruction manual | PS100 Mobile Storage System 14. Warranty and customer service Contact distributor for technical support /customer service USA [Style Asia Inc.] 101 Moonachie Ave Toll-Free: E-Mail: Moonachie, NJ 07074 888-765-5428 polaroidenergy@digitalsupportdesk.com EUROPE [GBT GmbH] An Gut Nazareth 18A...
Page 20
This product is manufactured, distributed and sold by GBT GmbH. Polaroid, Polaroid & Pixel, Polaroid Classic Border Logo, and Polaroid Colour Spectrum are trademarks of PLR IP Holdings, LLC, used under licence. GBT GmbH provides a manufacturers war- ranty and support for this product. PLR IP Holding, LLC does not manufacture this product or provides a manufacturers warranty or support.