Final Drive Oil - Honda GL1100 Owner's Manual

FINAL DRIVE OIL
Oil Level Check
Check the final drive oil level when speci-
fied by the maintenance schedule.
Place the motorcycle on its center stand
on level ground.
Remove the oil filler cap (I).
Check that the final gear case is filled up
to the lower edge of the oil inspection hole
(2).
Add the recommended oil until it reaches
the lower edge of the oil inspection hole, if
required.
Recommended oil: HYPOID GEAR OIL
SAE 90 (Above 5°C/41°F)
SAE 80 (Below 5°C/41°F)
30
(I) Oil mlcr cap
(2) Oil inspection hole
COOL,
Coola11
The a
coolan
and c
ethylel
rosion
reeoml
gines.
LABE
CAun
'*
HaT
alUJ
The f;
antifrE
This c
most
I
good
cancel
coolin
mendf
agains
of less
provid