Indicator Display; Maintenance - Puxing PX-578 Manual

》Don't charge the battery pack or transceiver while it is wet. Please wipe up it
first to avoid danger.
Charging Operation
If the battery pack is out of power, please charge it.
Please always use the original charger. The charger's indicator shows the
charging status below.

INDICATOR DISPLAY

RED
GREEN
Please charge the battery pack as follow,
1. Put the DC plug of the transformer into the DC socket of the charger unit.
2. Connected the supplied transformer to the AC jack
3. Slide the battery or the transceiver with a battery pack into the charger.
4. Make sure the battery pack contacts are in contact with the charging
terminals, and the charger LED is on, it begins to charge.
5. After charging the supplied battery pack for 4 hours, remove it or the
transceiver equipped with it from the charger. The charger light turns to
green automatically after charging is completed.
CAUTION
1. It is abnormal in case of the charger glisteningly before sliding the battery
pack into the charger.
2. Don't replace the battery pack until the indicator light is stable.
3. Make sure contact well, LED indicates red when it is charging, if LED
always blinking the battery pack is damaged or over the environment
temperature.

MAINTENANCE

1. Don't carry the radio by the antenna or microphone directly.
2. Use a soft, clean, dry cloth to clean the radio.
3. Please cover the speaker/microphone jacks with the supplied cover when
the radio is not in used.
4. The keypad, knobs and case will become dirty after long use; you can use
the soft detergent and cloth to clean it.
INSTALLING ACCESSORIES AND OPTIONAL
INSTALLING /REMOVING THE BATTERY PACK
Place the top of the battery pack on the chassis of radio.
STATUS
CHARGING
COMPLETED