Puxing PX-578 Manual page 11

Menu functions
● use the menu
1. Press the Menu button [MENU] screen shows "MENU";
2. Press the [ENT] to enter the menu mode;
3. Rotary encoder to select the menu option you want to use;
4. Press the [ENT] to enter the menu settings, through the rotary encoder
to select the desired menu function settings, and press [ENT] key to
confirm;
5. After setting press [VFO / MR] key to exit the menu mode.
Menu function setting
All channel scan
In Channel/Frequency status, press VFO/MR for 3s , the radio will scan from the
channel in use through all the channels/frequency, whenever any activity is
detected, the radio will suspend the scan for 5 seconds. It will then continue to
scan unless you press PTT or ENT key to end scanning.
Priority channel scan
Priority scan is to scan the priority channel firstly then scan other channel, if you
set priority channel 1, it will scan 1-2; 1-3; 1-4; and continue. In channel Mode,
press MENU , and press ENT until displays "PRI? 001" and press ENT to scan,
radio begin to scan priority channel, whenever any activity is detected, the radio
will suspend the scan for 5 seconds. It will then continue to scan unless you press
PTT or ENTER key to end scanning.
Select scan type
In channel/frequency mode, press MENU and press ENT to enter menu mode,
Rotate the Encoder until the display shows "SCANS 010". Press ENT and turn the
Encoder knob again to select the scan type (TO/CO/SE).
TO: Time-operated scan
Even though the radio stops on a busy channel, it will continue scanning the other
channels.
CO: Carrier-operated scan
The radio stops on a busy channel until there is no activity, and then radio begins
scanning the other channels