Cisco Catalyst 2960-X Hardware Installation Manual page 16

Rack-Mounting
Attaching the Rack-Mount Brackets for the Catalyst 2960-XR Switches
Procedure
Use four Phillips flat-head screws to attach the long side of the bracket to each side of the switch.
Figure 13: Attaching Brackets for 19-inch Racks
1 Front-mounting position
2 Number-8 Phillips flat-head screws (48-2927-01)
Catalyst 2960-X and 2960-XR Switch Hardware Installation Guide
16
3 Mid-mounting position
4 Rear-mounting position
Switch Installation
OL-28309-02