Final Product Requirements; Frequency Bands; Antenna Use And Transmit Power; Certified Antennas - Redline Communications RDL-3100-RMA Product Manual

RDL-3100 RMA MODULE
4

Final Product Requirements

The following requirements apply to all final products incorporating an RDL-3100-RMA,
module.

4.1 Frequency Bands

Operation of the final product requires a software 'key' that is available exclusively from
Redline. This key restricts device operation to the FCC/ISED 4940-4990 MHz, FCC
5150-5250 MHz or 5725-5850 MHz band. The professional installer and operator can
not modify or otherwise circumvent these operational restrictions.

4.1.1 Antenna Use and Transmit Power

The module supports operation with 2 x 2 MIMO antenna systems with two transmit
chains and two receive chains. The module must be used only with certified antennas
and using the channel size and output power level specified by the FCC/ISED
regulations.

4.1.2 Certified Antennas

This device has been designed to operate with the antennas listed in the following table.
Any additional antennas will be used only after authorization is obtained through Class II
permissive change.

Table 1: Approved Antennas

Manufacturer
Redline
L-Com
Redline
Redline
70-00184-05-00
Part #
AOD-DB-0512-02
HG5158DP-10U
30-00362-00
A3FT3204LTPD
Proprietary Redline Communications © 2017
PRODUCT MANUAL
Gain
Frequency Range
(dBi)
10 4940-5875 MHz
10 5100-5800 MHz
24 4900-6100 MHz
32 4900-5875 MHz
Page
4940- 5150- 5725-
4990 5250 5850
MHz MHz MHz
PMP PMP PMP
PMP PMP PMP
PTP PTP
PMP
PMP PMP
PTP PTP
PMP
PMP PMP
11 of 25 February 17, 2017