Page 2
All rights reserved Febraury 15 2017. The information in this document is proprietary to Redline Communications Inc. This document may not in whole or in part be copied, reproduced, or reduced to any medium without prior consent in writing from Redline Communications Incorporated.
RDL-3100 RMA MODULE PRODUCT MANUAL Product Overview The RDL-3100-RMA radio module is comprised of a proprietary Media Access Control (MAC) protocol engine and Time Division Duplexing (TDD)/ Orthogonal Frequency Division Duplexing (OFDM) digital radio. The module is not designed for stand-alone operation. The module is sold as one...
Conditions of Use 2.1 General Conditions The RDL-3100-RMA module is not provided for sale to the general public. The module contains a proprietary radio interface and can not be directly connected to any standard telecommunications or computer devices. This manual is provided as supplement to technical and operational documentation and training provided by Redline and its agents.
RDL-3100 RMA MODULE PRODUCT MANUAL Final Product Requirements The following requirements apply to all final products incorporating an RDL-3100-RMA, module. 4.1 Frequency Bands Operation of the final product requires a software 'key' that is available exclusively from Redline. This key restricts device operation to the FCC/ISED 4940-4990 MHz, FCC 5150-5250 MHz or 5725-5850 MHz band.
WARNING -- FCC RF Exposure Warnings To satisfy FCC RF exposure requirements for RF transmitting devices, the following distances should be maintained between the antenna of this device and persons during device operation: Table 48: FCC: RDL-3100-RMA Recommended Safe Distances Frequency (MHz) Deployment Separation Distance...
The antenna used for this transmitter must not be collocated in conjunction with any other antenna or transmitter. The RDL-3100-RMA has been designed to operate with an antenna having a maximum gain of 32 dBi. Antenna having a higher gain is strictly prohibited per regulations of ISED.
5800 220 cm (86.6") ou plus Le RDL-3100-RMA a été conçu pour fonctionner avec une antenne ayant un gain maximal de 32 dBi. Antenne ayant un gain plus élevé est strictement interdite par les règlements d'Industrie Canada. L'impédance d'antenne requise est de 50 ohms.