Download Print this page
JABSCO 31395-0092 Instruction Manual

JABSCO 31395-0092 Instruction Manual

31295 / 31395 - series automatic water system pump
Hide thumbs Also See for 31395-0092:

Advertisement

Quick Links

FEATURES

Smooth Flow
• Self-Priming up to 10 feet (3m)
• Dry running capability
• Soft noise absorbing mounts
• Snap-fit port fittings
• Built-in bypass — less pulsation
• Reduces need for accumulator tank
• Corrosion resistant materials
• Thermal overload protection
• Motor rating: IP 54
• CSA listed
• ISO 8846 MARINE (ignition protection)

SPECIFICATIONS

Motor:
Permanent Magnet, Ball Bearing Totally Enclosed.
Not for Continuous Duty. Intermittent Duty Only.
Pump:
Body
- Polypropylene
Diaphragm - Santoprene
Valves
- EPDM
Fittings: (2) 1/2" - 14 Male pipe
(2) 1/2" (13 mm) Hose Barbs
MODEL
31395-0092
31395-0094
31395-0392
31395-0394
31395-0292
31395-0294
31295-0092
31295-0094

OPERATION

With pump switch off and battery fully charged, fill water tank,
open all faucets, then turn pump switch on. Water will begin to
flow. When the water is free of air, turn faucets off. Remember,

DIMENSIONAL DRAWING

www.PumpAgents.com
PumpAgents.com - Click here for Pricing/Ordering
VOLTS
AMP DRAW (A)
@ 10 psi (0.7 bar)
12V dc
4.4
24V dc
2.2
12V dc
4.4
24V dc
2.2
12V dc
4.4
24V dc
2.2
12V dc
3.5
24V dc
1.7
4.75
(121 mm)
3.18
(80 mm)
4.24
(105 mm)
PumpAgents.com - buy pumps and parts online
31295 / 31395 - SERIES
AUTOMATIC WATER SYSTEM PUMP
Pump Series
Dimensions - Inches (mm)
Height
31X95-XXXX 4-3/4" (121)
FUSE SIZE (A)
OPEN FLOW
10
5
10
5
10
5
10
5
you are filling the water heater and the toilet and shower lines.
When all valves are shut-off, pump will stop. Should pump fail to
stop, turn switch off and see the trouble shooting guide.
9.00
(229 mm)
3.12
(80 mm)
Weight
Width
Length
lb. (kg)
6" (152)
9" (229)
3.5 (1.6 kg)
MAX PSI (bar)
GPM (l/min)
2.9 (11)
50 (3.4)
2.9 (11)
50 (3.4)
2.9 (11)
40 (2.7)
2.9 (11)
40 (2.7)
2.9 (11)
25 (1.7)
2.9 (11)
25 (1.7)
1.9 (7)
25 (1.7)
1.9 (7)
25 (1.7)
2.25
(63 mm)

Advertisement

loading

Summary of Contents for JABSCO 31395-0092

  • Page 1 (2) 1/2” (13 mm) Hose Barbs MODEL VOLTS AMP DRAW (A) FUSE SIZE (A) OPEN FLOW MAX PSI (bar) @ 10 psi (0.7 bar) GPM (l/min) 31395-0092 12V dc 2.9 (11) 50 (3.4) 31395-0094 24V dc 2.9 (11) 50 (3.4) 31395-0392 12V dc 2.9 (11)
  • Page 2 www.PumpAgents.com FIG. 2 FIG. 1 INSTALLATION STEP 3 STEP I Slide rubber mounts fully into 4 mounting tracks. Remove shipping plugs from pump ports. There may be slight STEP 4 amount of water that drains out of the pump as all pumps are Mount pump horizontally in an accessible location or vertically with tested at the factory before shipment.
  • Page 3 Non-Toxic antifreeze for potable system. Turn off power to the pump. Be sure that all the water water may be used with Jabsco pumps. Follow manufacturer’s from the drain lines is drained. recommendations. Refer to boat or equipment manufacturer’s 3.
  • Page 4 Pump circuit has no power Blown fuse/thermal protector tripped Pressure switch failure Defective motor www.jabsco.com THE PRODUCTS DESCRIBED HEREIN ARE SUBJECT TO THE JABSCO THREE-YEAR LIMITED WARRANTY, WHICH IS AVAILABLE FOR YOUR INSPECTION UPON PumpAgents.com - buy pumps and parts online REQUEST.
  • Page 5 For technical advice or service please take your pump into your local pump service center. To order pump or parts or for pricing please go to the following links : Jabsco Pumps Home >> Jabsco Pumps stock list >> PumpAgents.com - buy pumps and parts online...