Table of Contents
Advertisement
IMPORTANT NOTES:
•
After plugging in, the unit will be in the Standby mode (the Power indicator will be dimly lit). Press the POWER button on
the main unit or the remote to turn on the unit; the Power indicator will light brighter.
•
"
" will appear on the TV screen during operation if you try to access a function that is not available on the disc.
•
Some discs may take a few seconds to load.
•
If a disc is inserted incorrectly, is dirty and/or damaged or is not present at all, "NO DISC" will appear in the display.
•
Always hold the disc without touching either of its surfaces. When inserting a disc, position it with the printed title side facing
up, align it with the guides and place it in its proper position.
•
It is important that you read the manual that accompanies the DVD disc as there are features that are on this DVD player
that cannot be used with certain DVDs. There are also extra features that are different for each DVD disc, so they are not
explained in this owner's manual.
•
If the unit is in Stop mode, Pause mode, or if there is no disc in the disc tray, the screen saver will appear on the screen
after four minutes.
PLAYBACK OF A DVD
1
Press the POWER button to turn on the unit; the Power
indicator will light brighter.
3
After loading, the menu screen of the DVD should appear.
Use the Navigation (
desired option and the ENTER button
Adjust the Volume, EQ and Bass as shown on pages 19
and 20.
NOTES:
•
If a MENU appears on the TV screen, press the Navigation (
press the ENTER button. Please make sure to refer to the disc's jacket or case for additional information.
•
Resuming playback may not work on all discs.
DVD BASIC OPERATION
1
2
) buttons
to select the
, , ,
①
to select it.
②
2
While in DVD mode, insert a disc with the label side facing
up into the disc slot. "CLOSE" will appear briefly on the
screen and in the display, and the disc will be loaded.
4
To stop playback, press the Stop ( ) button
Key To Continue" will appear on the screen. Because the
unit will remember where you stopped, simply press the
Play/Pause (
) button
left off (resuming playback). If the Stop ( ) button
pressed twice, the screen shows " " and the unit will
stop completely.
) buttons to select the desired option/item, then
, , ,
21
2
1
; "Press Play
①
to resume playback where you
②
is
①
Advertisement
Table of Contents
