Table of Contents
Advertisement
To reduce the risk of fire or electric shock, do not expose this product to water, rain or moisture.
To prevent the risk of electric shock, do not remove the cover or back of this product. In case of
product failure, only qualified personnel can repair. There are no user-serviceable parts inside.
Use of controls, adjustments, or performance of procedures other than those specified herein may
result in dangerous radiation exposure. This product is rated as LASER CLASS 1 PRODUCT.
CAUTION: Laser radiation when open - never stare into the laser beam.
CAUTION !
Dangerous tension inside the product ! Do not open. Risk of electric shock ! No parts can be
repaired by the end-user. Only qualified personnel can repair and maintain this product.
If the electric cord is damaged, it must be replaced by the manufacturer or qualified after-sales personnel in order to avoid any
danger.
The product must be installed in accordance with local laws.
Damaged batteries must be properly disposed. In order to protect the environment, please dispose the batteries properly, in
accordance with local laws (information is available at your reseller).
Where to install the product
-
Place the product on a straight, rigid and stable place. Do not place the product on a carpet.
-
Do not place the product on top of another that may cause overheating (for example, a receiver or amplifier).
-
Do not place anything underneath the product (for example, CDs or magazines).
Proper ventilation
-
Place the product in a sufficiently–aerated place to avoid overheating. Allow at least 10cm spacing at the back and
top of the product, and 5cm spacing on both sides to prevent overheating.
-
Do not place items such as newspapers, tablecloth, curtains, in front of the ventilating openings.
Do not expose the product to high temperatures, moisture, water and dust.
-
The apparatus shall not be exposed to dripping or splashing. No object filled with liquids, such as vases, shall be
placed on the apparatus.
-
Do not place other items close to this product that may damage it (for example, objects containing water or lightened
candles).
-
No naked flame sources, such as lighted candles, should be placed on the apparatus.
Electric supply
-
Please unplug the product in case of prolonged non-use.
-
This product is intended to be used under temperate climate and should not be used under tropical climate.
-
If the supply cable is damaged, it must be replaced by the manufacturer or qualified after-sales personnel to avoid
any danger.
-
This product must be connected to an electrical supply 230V ~ 50Hz.
-
The plug must be accessible after installation.
Important safety instructions – please read carefully
and keep for future reference
1
Advertisement
Table of Contents
