Table of Contents
Advertisement
AUDIO SETUP PAGE:
Select Audio and then select the desired option using the Navigation (
menus/screens and press the ENTER button to select (see page 14 for details).
SPEAKER/DOWNMIX
1
--Audio Setup Page --
Speaker Setup
SPDIF Setup
Go To Speaker Setup Page
Select Speaker Setup, then press the ENTER button; the
Downmix menu will appear.
LT/RT: Select to hear the sound in theatrical downmix
mode.
STEREO: Select to hear the sound in Stereo downmix
mode.
DOLBY DIGITAL SETUP PAGE:
Select Dolby and then select the desired option using the Navigation (
menus/screens and press the ENTER button to select (see page 14 for details).
DUAL MONO
1
--Dolby Digital Setup --
Dual
Mono
Dynamic
STEREO: Select this to set the Dolby Digital output to
Stereo mode.
L-MONO: Select this to set the Dolby Digital output to left
mono mode, meaning it will reproduce the left mono signal
to the Left and Right channels.
R-MONO: Select this to set the Dolby Digital output to right
mono mode, meaning it will reproduce the right mono signal
to the Left and Right channels.
MIX-MONO: Select this to reproduce both channels mixed
together.
SETUP MENU
Preferences
Video
VideoPreferences
Stereo
L-Mono
R-Mono
Mix-Mono
, , ,
SPDIF SETUP
1
--Audio Setup Page - -
Speaker Setup
SPDIF Setup
Go To SPDIF Setup Page
Select SPDIF Setup, then press the ENTER button; the
Speaker Setup menu will appear.
Select SPDIF and then set as desired:
SPDIF OFF: Digital audio output is off.
SPDIF/RAW: Dolby Digital signals are going out unchanged
to the digital output. MPEG-2 multi-channel signals are
converted to PCM (Pulse Code Modulation).
SPDIF/PCM: Dolby Digital and MPEG-2 multi-channel
signals are converted to PCM (Pulse Code Modulation).
Select LPCM and set as desired:
LPCM is the method of encoding, and is usually set to 48K.
However, if 96K sampling frequency is used, select 96K.
, , ,
DYNAMIC
1
--Dolby Digital Setup - -
Dual Mono
Dynamic
Set DRC To Full
Use the slider to set the Dynamic Range. Set to OFF to turn
Dynamic Range Off. This setting will make loud sounds
quieter and soft sounds louder to give an overall more
acceptable sound output.
16
) buttons to navigate through the
P references
Video
) buttons to navigate through the
VideoPreferences
FULL
3/4
1/2
1/4
OFF
Advertisement
Table of Contents
