Electrical Safety - Swann SW2020R User Instructions

There are adjustable feet under the bottom of the washing machine.
Before use, they should be adjusted so that the washing machine is
level. This will minimize vibrations and thus noise during.
First, loosen the plastic adjustment nut.
Adjust by rotating the feet upwards or downwards.
We recommend using a spirit level to check the item is level.
Tighten adjustment nut by rotating it upwards.

Electrical Safety

THIS APPLIANCE MUST BE PLUGGED INTO AN EARTHED SOCKET.
Before switching on, make sure that the voltage of your electricity supply is
the same as that indicated on the rating plate. This product is designed to
operate on 220 – 240V AC; 50Hz. Connection to any other power source may
damage the unit.
This product may be fitted with a non – rewireable plug. If it is necessary to
change the fuse in the plug, the fuse cover must be refitted. If the fuse cover
becomes lost or damaged, the plug must not be used until a suitable
replacement obtained.
If the plug has to be changed because it is not suitable for your socket, or
becomes damaged in any way, it should be cut off and an appropriate plug
fitted following the wiring instructions below. This should be carried out by a
qualified electrician. The plug removed must be disposed of safely, as
insertion into a 13 Amp socket is likely
Wiring Instructions
The wires in this mains lead are colored in accordance with the
following code:
Blue – Neutral 'N'
Brown – Live 'L'
Green & Yellow – Earth 'E'
Swan Helpline No. 0845 610 4118
to cause an electrical hazard.
4