Section 7: Maintenance And Cleaning; Water Inlet Filters - Swann SW2020R User Instructions

SECTION 7: MAINTENANCE AND CLEANING

Unplug your machine.
Close the water tap.

WATER INLET FILTERS

On the tap part of your machine's water inlet hose and at the ends of water
inlet valves, there are filters to prevent entrance of the dirt and foreign
materials in the water to the machine. If the machine is unable to receive
sufficient water although your water tap is opened, these filters should be
cleaned.
Remove the water inlet hose.
Remove the filters found on the water inlet valves by using a pincer
and wash thoroughly with a brush.
Clean the filters of the water inlet hoses located on the tap side by
removing manually together with the seal.
After you clean the filters, you can fit them the same way as you have
Removed them.
Swan Helpline No. 0845 610 4118
18