Table of Contents
Advertisement
Available languages
Available languages
Freedom Par Hex-4 QRG
Power Linking
Fuse Replacement
Battery Power
Charging the
Battery
Battery Life
Indicator
Battery Run Time
Power linking is when products are daisy chained together through their Power In
and Power Out sockets, so that many products can be powered from one outlet.
For the maximum number of Freedom Par Hex-4s that can be power linked at 120
V or at 240 V, see the User Manual or the label on the product.
The
User
Manual
http://www.chauvetlighting.com
1. Disconnect the product from power.
2. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
3. Pry the safety cap out of the housing.
4. Remove the blown fuse from the clip on the front of the safety cap and
replace with a fuse of the exact same type and rating.
5. Re-insert the fuse holder and reconnect power.
Disconnect the product from power before replacing the fuse.
The Freedom Par Hex-4 comes with a rechargeable lithium battery for cable-free
operation.
The battery charges whenever the product is plugged into a power source. If the
product is plugged in and not in operation, make sure the On/Off switch is in the
Off position.
For optimal battery life, charge the Freedom Par Hex-4 battery for 24 hours
prior to initial use.
The battery life indicators are the 4 small green LEDs on either side of the
<D-Fi AUTO Sync/Clear> button. The indicators show how much battery life
remains available. The drawing below provides a key to reading the battery life
indicators.
100%
The Freedom Par Hex-4 has a limiter option that decreases the power output and
extends battery life when more than 4 colors are turned on. This option is set in
the control panel. The battery times listed below assume that the limiter option is
enabled.
Maximum Run Time
(all colors on)
Up to 8 hours
is
available
at
75%
50%
Maximum Run Time
(single color on)
Up to 20 hours
4
the
Chauvet
website:
D-Fi™ AUTO
Sync/Clear
Button
25%
Recharge Time
6 hours
EN
Advertisement
Table of Contents
