Download Print this page

Philips HP4944 User Manual page 5

Advertisement

For additional protection, we advise
you to install a residual current device
(RCD) in the electrical circuit that
supplies the bathroom. This RCD must
have a rated residual operating current
not higher than 30mA. Ask your installer
for advice.
Do not insert metal objects into the air grilles to avoid electric shock.
Never block the air grilles.
Before you connect the appliance, ensure that the voltage indicated
on the appliance corresponds to the local power voltage.
Do not use the appliance for any other purpose than described in
this manual.
Do not use the appliance on artificial hair.
When the appliance is connected to the power, never leave it
unattended.
Never use any accessories or parts from other manufacturers or that
Philips does not specifically recommend. If you use such accessories
or parts, your guarantee becomes invalid.
Do not wind the mains cord round the appliance.
If the appliance overheats, it switches off automatically. Unplug the
appliance and let it cool down for a few minutes. Before you switch
the appliance on again, check the grilles to make sure they are not
blocked by fluff, hair, etc.
Noise level: Lc = 76 dB [A]

Advertisement

loading

This manual is also suitable for:

Hp4945