Table of Contents
Advertisement
8
PG
For FULL lock : Touch the
(1 bar) icon again for 5 seconds to go to full lock. No changes can be
made in full lock
(2 bars). Once locked, the CT100 will respond just to MENU.
To UNLOCK , Press MENU.
Touch and hold
icon for 5 seconds for 2 bars (if not there already).
Then touch and hold the
icon for another 5 seconds. Each 5 second touch and hold must be separate.
Touch
to return to the Home screen.
CALIBRATE
Your thermostat was accurately calibrated at the factory to ±1° F of actual ambient
temperature. You do have the option, however, to change the display temperature to match that of a
previous thermostat, or to match another thermostat already in your home. The range of change is
from -6°F to +6°F or -3°C to +3°C.
To change your Thermostat Calibration, touch MENU and then touch CALIBRATE.
Use the + / - to adjust the displayed temperature up or down, as desired.
The DELTA FACTOR that appears on the screen will also automatically increase or decrease
for each 0.5° (F or C) adjustment so you can see your change. The large display will show the
modified temerature reading that will be displayed on the HOME screen and used as the new room
temperature.
Hide quick links:
Advertisement
Table of Contents
