Table of Contents
Advertisement
UK only
THE ADDITIONAL COMMENT OF ELECTRICAL CONNECTION
The tool is double insulated for safety, no earth connection is required.
CAUTION:
The tool must be connected to a plug having a rated current greater than that of tool.
The rated voltage and current appear on the name plate.
IMPORTANT: The wires in the mains lead are coloured in accordance with the following code.
NOTE:
As the colours of the mains lead of the tool may not correspond with the coloured markings
identifying the terminals in your plug, proceed as follows:
THE WIRE WHICH IS COLOURED BLUE MUST BE CONNECTED TO THE TERMINAL
WHICH IS MARKED WITH THE LETTER ''N'' OR COLOURED BLACK. THE WIRE WHICH IS
COLOURED BROWN MUST BE CONNECTED TO THE TERMINAL WHICH IS MARKED WITH
THE LETTER ''L'' OR COLOURED RED.
CAUTION:
Neither wire is to be connected to earth terminal which is marked with the letter ''E'' or symbol
''
''.
FOR 110 VOLT TOOL, USE PLUGS TO BS4343.
DOUBLE INSULATION
11
Advertisement
Table of Contents
