Related Manuals for Makita 6904V
Summary of Contents for Makita 6904V
- Page 1 INSTRUCTION MANUAL Impact Driver 6904V 011483 DOUBLE INSULATION IMPORTANT: Read Before Using.
-
Page 2: Specifications
ENGLISH (Original instructions) SPECIFICATIONS Model 6904V Wood screw / Lag screw 180 mm Hex screw 6 mm Capacities Self-drilling screw 6 mm Driving shank 6 mm High: 0 - 2,400 No load speed (min Low: 0 - 2,100 High: 0 - 3,000... - Page 3 Power tool plugs must match the outlet. Never Makita Corporation responsible modify the plug in any way. Do not use any manufacturer declare that the following Makita adapter plugs with earthed (grounded) power machine(s): tools. Unmodified plugs and matching outlets will Designation of Machine: reduce risk of electric shock.
-
Page 4: Impact Driver Safety Warnings
14. Remove any adjusting key or wrench before parts. This will ensure that the safety of the power turning the power tool on. A wrench or a key left tool is maintained. attached to a rotating part of the power tool may 26. -
Page 5: Speed Change
To start the tool, simply pull the switch trigger. Tool speed ASSEMBLY is increased by increasing pressure on the switch trigger. Release the switch trigger to stop. CAUTION: Reversing switch action Always be sure that the tool is switched off and •... -
Page 6: Operation
sleeve as far as it will go. The bit-piece should be the bit will not be secured. In this case, try inserted into the sleeve with its pointed end facing re-inserting the bit according to the instructions in. Then release the sleeve to secure the bit. above. -
Page 7: Maintenance
Only use accessory or attachment for its stated purpose. If you need any assistance for more details regarding these accessories, ask your local Makita Service Center. Phillips bit • Socket bit • Bit piece •... - Page 8 Makita Corporation Anjo, Aichi, Japan www.makita.com 883810C8...