Activating / Deactivating The Laminator; Operation - ALDI script OL 250-Q125 User Manual

A4 Laminator

Activating / deactivating the laminator

1. Move the ON/OFF switch
The ready indicator
laminator has reached the correct temperature for lamination.
The preheating time may vary depending on the ambient temp era-
ture and air humidity.
2. Move the ON/OFF switch to "OFF" (

Operation

WARNING!
Risk of injury!
Handling the laminator improperly may result in injury.
− If an object (sleeves, tie etc.) is unintentionally taken into the
laminating pouch infeed slot, immediately disconnect the
mains plug.
NOTICE!
Risk of damage!
Improper handling of the laminator may lead to damage to the
laminator or documents.
− Do not in any case laminate documents with a treated surface
(e.g. fax or thermopaper, Polaroid pictures etc.) and papers
with surfaces that may be altered through heat (tickets, ultra-
sonic scans etc.).
− Only use one laminating pouch per lamination, as laminating
pouches may stick tightly together.
− Do not leave any laminating pouches in or next to the lamina-
tor after lamination.
When using the laminator, a slight odour may be produced.
Ensure there is sufficient ventilation in the room, e.g. by opening windows.
AFTER SALES SUPPORT
00 800 79 333 900
GB IRE
4
to "ON" (―) to switch the laminator on.
1
will turn from dark blue to red once the
) to switch the laminator off.
AAAAA
GB
Operation
www.monolith-support.com
IRE
13