Turbo Nozzle; Water Inlet Filter; Using Detergent - Rac -HP101 Manual

TURBO NOZZLE

A turbo nozzle, sometimes referred to
as a rotary nozzle, is a very effective
tool that can significantly reduce
cleaning time. The turbo nozzle
combines the power of a narrow high
impact stream and the efficiency of a 25
degree fan pattern. This swirls the
narrow high impact stream into a cone
shape that cleans a larger area.
CAUTION: Since a turbo nozzle uses a
narrow high impact stream, only use it
in applications where the cleaning
surface cannot be damaged by a
narrow high impact spray. Note: The
turbo nozzle is NOT adjustable and
cannot be used to apply detergent.
WARNING
When cleaning painted surfaces, ensure
that the paint is sound and there are no
signs of rusting or blistering.
It is your responsibility to check the
suitability of the surface to be cleaned.
Hilka Pro Imports cannot be held
responsible for any damage caused.
-7-

WATER INLET FILTER

The water inlet filter must be inspected
regularly, so as to avoid blockage and
restriction in the water supply to the pump
(Fig 12). The inlet filter is located in the
quick fit connector (14).
Fig 12
Fig 13
Release
button

USING DETERGENT

The detergent containers can be removed for filling/cleaning by pressing the release
button (Fig 13). Add detergent to each container and replace cap. Select detergent
tank using the detergent supply switch (4). Press the trigger to start spraying.
NOTE: Detergents can only be used in low pressure settings:
-with adjustable lance in low pressure setting (Fig 11)
-with fixed brush
-with rotary brush
The detergent will not flow in high pressure settings:
-with adjustable lance in high pressure setting (Fig 11)
-with turbo lance
Detergent Tank Selection
Position 1
Position 2
-8-