Solid Wall or Ceiling
Installation
1. Place the plastic wall-mounting ring on a
wall or ceiling.
2. Mark the points where you will insert the
screws. Take out the mounting ring.
3. Drill holes in the marked points and
insert the plastic wall anchors.
4. Use the supplied screws to attach the
mounting ring to the wall.
8
5. To attach the Access Point to the
mounting ring.
6. Twist to lock the Access Point onto
the ring.
7. Plug the CAT 5 cable into the LAN
port on the Access Point.
D-Link DWL-6610AP Quick Install Guide