Zanussi ZGF 782 Instruction Booklet
Hide thumbs
Also See for ZGF 782:
- Instruction booklet (20 pages) ,
- Instruction booklet (19 pages) ,
- Instruction booklet (19 pages)
Related Manuals for Zanussi ZGF 782
Summary of Contents for Zanussi ZGF 782
- Page 1 GAS HOB MODEL ZGF 782 INSTRUCTION BOOKLET Please read this instruction booklet before using the appliance...
-
Page 3: Important Safety Information
Important Safety Information You MUST read hese warnings carefully before installing or using the hob. If you need assistance, contact our Customer Care Department on 08705 727727 Installation Child Safety Service Environmental Information During Use Keep this instruction book for future reference and ensure it is passed on to any new owner. -
Page 4: Table Of Contents
Contents For the Installer For the User Technical Data Page 1 0 Description of the Hob Page Important Safety Operation Page Requirements Page 1 1 Maintenance Installation Page 1 2 and Cleaning Page Gas Connection Page 1 2 Something Building In Page 1 3 Not Working Page... - Page 5 Description of the Hob INSTALLATION WHEN THE HOB IS FIRST INSTALLED...
-
Page 6: Operation
Operation HOB BURNERS FO 2366 Using the Wok Stand... -
Page 7: And Cleaning
Maintenance and Cleaning The Hob Top FO 2030 Pan Supports and Wok Stand Fig. 1 Accessories Cast Iron Pan Supports FO 2238 Fig. 2 The Burners... -
Page 8: Something Not Working
Something Not Working? SYMPTOM SOLUTION Service and Spare Parts CUSTOMER CARE 0870 5 929929... -
Page 9: Peace Of Mind For 24 Months
Peace of Mind for 24 Months ZANUSSI GUARANTEE CONDITIONS European Guarantee Exclusions... -
Page 10: Instructions For The Installer
Instructions for the Installer Engineers technical data OVERALL DIMENSIONS SUPPLY CONNECTIONS CUT OUT DIMENSIONS Ignition HT Spark BURNER RAPID SEMI-RAPID AUXILIARY ULTRA-RAPID (double-crown) (large) (medium) (small) rod pan supports cast iron pan supp. POSITION NOMINAL THERMAL POWER 0.65 0.45 0.33 NOMINAL FLOW RATE 0.286... -
Page 11: Important Safety Requirements
Important safety requirements Location FITTING THE GAS HOB FITTING THE GAS HOB WITHOUT A COOKER HOOD ABOVE WITH A COOKER HOOD ABOVE 700 mm 700 mm 400 mm 400 mm 400 mm 400 mm FO 2369* FO 2231*... - Page 12 Installation IMPORTANT FO 0814 Gas Connection FO 0264 Rectangular cut-out size for hob Cut Out Size 150 min FO 2038...
-
Page 13: Building Over A Kitchen Unit With Door
Building In Building over a cupboard or drawer ON/OFF SWITCH ON/OFF SWITCH FLEX OUTLET FLEX OUTLET FO 0764 FO 0763 FO 1013 Dimensions are given in mm. Building over a kitchen unit with door Fitting the Hob into the worktop FO 2039 Seal FO 0199... -
Page 14: Electrical Connections
Electrical connections THIS HOB MUST BE EARTHED. The manufacturer declines any liability should these safety measures not be observed. This hob is designed to be connected to a 240V 50Hz AC electrical supply. FO 0390... -
Page 15: Wiring Diagram
Wiring Diagram 220/240 A. IGNITOR SWITCH B. IGNITOR UNIT... -
Page 16: Fault Finding
Fault Finding Preliminary Electrical Systems Check SOCKET PLUG (with cover removed) (face view) Earth Wire Green/Yellow Blue Brown Green Yellow START Neutral Wire Isolate appliance Blue and carry out: A: Earth Continuity check. Blue Green Brown Yellow Carry out: Electricity supply Carry out: D: Resistance to should now be... - Page 17 Ignition System / Gas Ignition Check gas supply at Ignitor does not spark burner Check plug top fuse and Light burner manually replace if necessary Check by pass simmer Check polarity and earth adjusted continuity of supply point Check position of the Check earth continuity electrode of appliance...
- Page 18 Commissioning FO 2048 Pressure Testing...
-
Page 19: Conversion From Natural Gas To Lpg
Conversion from Natural Gas to LPG TO ADJUST THE GAS RATE Method IMPORTANT... - Page 20 35669-7303 12/99...