Summary of Contents for Unicare Health Seahorse Sanichair
Page 1
Seahorse Sanichair Instruction & Safety Manual Please read this manual before operation, for maintenance instructions and safe usage The enabling power of applied knowledge...
Pack Contents Your Seahorse pack should contain the following parts: MAIN COMPONENTS Seat Assembly Frame Pommel Potty Foot rest 4 Point Harness SMALL COMPONENTS Locking Hand Wheels Footrest Hand Wheel Foot and Ankle Strap T-nut Washer If you have purchased the optional headrest your pack should contain the following components: Headrest Assembly...
Seahorse Sanichair Instruction & Safety Manual Introduction The Seahorse consists of two separate seat and frame sizes. Within each size option it is possible to specify two sizes of soft liner, allowing you to tailor the product to your child’s needs. As your child grows, the liner can be changed to increase the size of the seat without the need to re-invest in a completely new toileting and showering chair.
Assembling and Adjusting the Footrest • Place a washer K onto the footrest threaded hand wheel H and put the hand wheel screw through the open hole on the front of the footrest. • Wind a T-nut J onto the screw (ensure that it is in the correct orientation). •...
Seahorse Sanichair Instruction & Safety Manual Fitting the Pommel • Hook the rear fl ange at the back of the pommel C onto the front of the seat aperture. • Hinge the pommel downwards so that the front fl ange of the pommel clips over the ridged detail on the front of the seat.
Adjusting the Seat Angle The Seahorse has been designed to provide angular adjustment of the seat allowing the Carer to orientate the child in a convenient position for showering and toileting. Unlocking the Seat • A locking hand wheel is located on the right adjustment leg of the Seahorse.
Seahorse Sanichair Instruction & Safety Manual Assembling the Headrest If you have purchased the optional headrest this can be assembled to the seat in the following manner: • Place a washer O onto threaded hand wheel • Position a T-nut N behind the adjustment plate on the back of the seat.
Inspect your Seahorse on a regular basis (3 monthly intervals). Pay particular attention to the harness straps and pivoting mechanism. If you are in any doubt concerning the condition of the product, contact Unicare Health. Safety Standards and EU Directives The Seahorse complies with the following standards and EU Directives: •...
Seahorse Sanichair Instruction & Safety Manual Parts List The exploded drawing illustrates all the components that constitute a Seahorse Sanichair. For ordering parts please identify the part number that you require and contact your supplier. Framework Footrest Assembly Part No...
Need help?
Do you have a question about the Seahorse Sanichair and is the answer not in the manual?
Questions and answers