Setup Wizard - NETGEAR MR814V2 User Manual

Setup Wizard

The first time you connect to the Wireless Router, the Setup Wizard will run automatically. (The
Setup Wizard will also run if the Wireless Router's default setting are restored.)
1. Step through the Wizard until finished.
•
You need to know the type of Internet connection service used by your ISP. Check the
data supplied by your ISP.
•
The common connection types are explain ed in the tables b elow.
2. On the final screen of the Wizard, run the test and check that an Internet connection can be
established.
3. If the connection test fails:
•
Check your data, the Ca ble/DSL modem, and all connections.
•
Check that you have entered all data correctly.
•
If using a Cable modem, your ISP may have recorded the MAC (physical) address of
your PC. Run the Wizard, and on the Cable Modem screen, use the "Clone MAC ad-
dress" button to copy the MAC address from your PC to the Wireless Router.
Common Connection Types
Cable Modems
Type Details
Dynamic Your IP Address is allocated
IP Address automatically, when you
connect to you ISP.
Static (Fixed) Your ISP allocates a perma nent
IP Address IP Address to you.
DSL Modems
Type Details
Dynamic Your IP Address is allocated
IP Address automatically, when you
connect to you ISP.
Static (Fixed) Your ISP allocates a perma nent
IP Address IP Address to you.
PPPoE You connect to the ISP only
when required. The IP address
is usually allocated automati-
cally.
Setup
ISP Data required
Usually, none.
However, some ISP's may
require you to use a particular
Hostname, Domain name, or
MAC (phys ical) address.
IP Address allocated to you.
Some ISP's may also require you
to use a particular Hostname,
Domain name, or MAC (phys i-
cal) address.
ISP Data required
None.
IP Address allocated to you.
User name and password.
11
Wireless Router User Guide
PPTP Mainly used in Europe.
You connect to the ISP only
when required. The IP address
is usually allocated automati-
cally, but may be Static (Fixed).
Other Modems (e.g. Broadband Wireless)
Type Details
Dynamic Your IP Address is allocated
IP Address automatically, when you con-
nect to you ISP.
Static (Fixed) Your ISP allocates a permanent
IP Address IP Address to you.
Big Pond Cable (Australia)
For this connection method, the following data is required:
•
User Name
•
Password
•
Big Pond Server IP address
SingTel RAS
For this connection method, the following data is required:
•
User Name
•
Password
•
RAS Plan
•
PPTP Server IP Addres s.
•
User name and pas sword.
•
IP Address allocated to
you, if Static (Fixed).
ISP Data required
None.
IP Address allocated to you.
12