If the key value does not match the transmitting station, d e-
cryption will fail.
•
The easiest way to e nsure there are no problems is to have
every Station, including the Access Point, use the same key
ta ble (all entries identical).
128 Bit Encryption
•
If selected, data is encrypted using the key before being transmit-
ted. The receiving station must be set to use 128 Bit Encryption,
and have the same Key value. Otherwise, it will not be able to d e-
crypt the data.
•
Key - Enter the key value you wish to use. Other stations must
have the same key.
Setup
Wireless Router User Guide
Password Screen
The password screen allows you to assign a passwo rd to the Wireless Router.
Once you have assigned a password to the Wireless Router (on the Password screen above)
you will be prompted for the password when you connect, as shown below. (If no password
has been set, this dialog will not appear.)
•
•
19
Figure 9: Password Screen
Figure 10: Password Dialog
Leave the "User Name" blank.
Enter the password for the Wireless Router, as set on the Password screen above.
20