Anti-Static Brush - Hitachi HT-4139-28 Maintenance Manual

REV0 10.02.15

8.3.36 Anti-Static Brush

Tools Needed: Magnetic Philips Screwdriver (No.2)
■ Replacing the Anti-Static Brush on the Top Guide
① Remove the Top Cover. For instructions, please refer to "8.1 Preparation"
② Remove and replace the Anti-Static Brush on the Top Guide
③ Take the reverse step to attach the Anti-Static Brush.
Top Guide
#62 Anti-static brush
■ Replacing the Anti-Static Guide on the T11 Guide (A) ASSY
① Remove the Top Cover and the Main Cover (L) (R). For instructions, please refer to "8.1 Preparation"
② Remove the Stacker. For instructions, please refer to "8.3.8 Replacing the Stacker"
③ Unscrew 4 bind-head screws on the Stacker Back Guide (R)
④ Remove and replace the Anti-Static Guide from T11 Guide (A) ASSY
⑤ Take the reverse steps to attach the Anti-Static Guide
Stacker Bck Guide(R)
Bind-head screw
T11 Guide(A)ASSY
Bind-head screw
#62 Anti-static brush
Bind-head screw
Bind-head screw
■ Replacing the Anti-Static Brush on the Lower Guide
① Remove the Hopper ASSY from the device. For instructions, please refer to "8.3.7 Replacing the
Hopper ASSY"
② Unscrew 2 bind-head screws from the Front Guide, and remove the Front Guide.
③ Remove and replace the Anti-Static Brush on the Lower Guide.
④ Take the reverse steps to attach the Anti-Static Guide.
Low Guide ASSY
#62 Anti-static brush
-H8-49-