Setting A Programme; Delay Start Option - Frigidaire FWF 71243W User Manual

Setting a programme

1. Turn the programme knob to switch the
appliance on and set the programme:
• The indicator of the button start/
pause flashes.
• The display shows the programme
duration.
2. If necessary, change the temperature
and the spin speed or add available
options. When you activate an option,
the indicator of the set option comes on.
If you set something incorrect, the
display shows the message
Starting a programme without
the delay start
Press the button start/pause.
• The indicator of the button start/
pause stops to flash and stays on.
• The programme starts, the door
locks, the indicator
• The programme time decreases with
steps of one minute.
The drain pump can operate for a
short time at the beginning of the
washing cycle.
Starting a programme with the

delay start option

1. Press the button delay start again and
again until the display shows the delay
you want to set. The delay start
indicator comes on.
2. Press the button start/pause:
• The door is locked and the indicator
is on.
• The appliance starts the countdown.
• When the countdown is completed,
the programme starts automatically.
To cancel the delay start option:
.
Interrupting a programme and
changing the options
You can change only some options before
they operate.
1. Press the button start/pause.
The indicator flashes.
is on.
2. Change the options.
3. Press the button start/pause again.
The programme continues.
Cancelling a running
programme
1. Turn the programme knob to position
2. Turn the programme knob again to
You can cancel or change the set of
the delay start option before you press
the button start/pause. After pressing
the button start/pause you can only
cancel the delay start option.
a. Press the button start/pause to set
the appliance to pause. The
indicator of button start/pause
flashes.
b. Press the button delay start until the
display shows
Press the button start/pause again
to start the programme immediately.
to cancel the programme and to
deactivate the appliance.
activate the appliance. Now, you can
set a new washing programme.
Before starting the new programme
the appliance could drain the water. In
this case, make sure that the
detergent is still in the detergent
compartment, if not fill the detergent
again.
DAILY USE
.
17