Setting A Programme - Electrolux EWF 1272BW User Manual

3.
B
• Position A for powder detergent (factory setting).
• Position B for liquid detergent.
When you use the liquid detergent:
• Do not use gelatinous or thick liquid detergents.
• Do not put more liquid then the maximum level.
• Do not set the delay start (or Finish in option).
10.5 Activating the appliance
Press and hold for a couple of seconds
the On/Off button to activate or
deactivate the appliance.
A tune sounds when the appliance is
activated.

10.6 Setting a programme

1. Touch the programme button
set the programme:
• The indicator of the button
flashes slowly.
2. If necessary, change the temperature
and the spin speed or add available
options. When you activate an
option, the indicator of the set option
comes on.
If you set something
incorrect, the indicator of the
button flashes red three
times.
10.7 Starting a programme
without the delay start
Touch the button
• The indicator of the button
stops to flash and stays on.
and
.
4.
• The programme starts, the door
locks, the indicator
The drain pump can operate
for a short time at the
beginning of the washing
cycle.
10.8 Starting a programme with
the delay start
The start of the programme can be
delayed by 9, 6 or 3 hours.
1. Touch the button
delay you want to set.
The indicator of the selected delay is on.
2. Touch the button
• The appliance starts the
countdown.
• When the countdown is
completed, the programme starts
automatically.
You can cancel or change
the set of the delay start
before you touch the button
. After touching the
button
cancel the delay.
ENGLISH
is on.
to choose the
:
you can only
13